We are counted as one of the key Traders of Non Ferrous Metal Scrap. We are proud to be the active member of MRAI The complete array of Non Ferrous Metal Scrap is obtained from authentic vendors thus ensuring it is in compliance with set industrial standards and norms. These Non Ferrous Metal Scraps are used across diverse industrial segments and obtainable at highly competitive rates. Gaining prominence in the industry, we are able to offer our client an outstanding range of Non Ferrous Scrap. We always strive to constantly expand our presence through developments of new suppliers and buyers.
It consists of lithographic sheets, free of paper, plastics and excessive presence of ink and other impurities.
Shall consist of new, clean, uncoated and unpainted aluminum scrap of two or more alloys with a minimum thickness of .015” (.38 mm) and to be free of hair wire, wire screen, dirt and other non-metallic items. Oil and grease not to total more than 1%. Also free from punching less than 1/2” (1.27 cm) in size.
Shall consist of clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items. Oil and grease not to total more than 1%. Up to 10% Tale permitted.
Shall have a briquette density of 50 pounds per cubic foot (800 kg/m3) minimum. Nominal briquette size shall range from 12” to 24” (30.5 x61 cm) 12” to 24” (30.5 x 61cm) in uniform profile with a variable length of 8” (20.3 cm) minimum and 48” (122 cm) maximum. Briquettes shall be bundled or stacked on skids and secured with a minimum of one vertical band per row and a minimum of one girth band per horizontal layer.
Pure aluminum wire without ACSR, iron, grease, clamps, insulation, and other foreign matter.
Shall consist of clean, uncorroded aluminium borings and turnings of two or more alloys and subject to deductions for fines in excess of 3% through a 20 mesh screen and dirt, free iron, oil, moisture and all other non-metallic items. Material containing iron in excess of 10% and/or free magnesium or stainless steel or containing highly flammable cutting compounds will not constitute good delivery. To avoid dispute, material should be sold on basis of definite maximum zinc, tin and magnesium content.
Shall consist of all clean aluminum castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%.
Shall consist of clean, new, pure, uncoated 1000 and/or 3000 and/or 8000 series alloy aluminum foil, free from anodized foil, radar foil and chaff, paper, plastics or any other non metallic items. Hydraulically briquetted material and other alloys by agreement between buyer and seller.
Shall consist of clean, coated/ uncoated aluminum extrusions of one specified alloy only and to be free from sawings, stainless steel, zinc, iron, dirt, oil, grease and other non-metallic items.
Shall consist of aluminum wire scrap with various types of insulation. To be sold on a sample or recovery basis, subject to agreement between buyer and seller.
Shall consist of miscellaneous old zinc base diecastings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings.All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible. Material containing in excess of 30% iron will not constitute good delivery.
Shall consist of clean dry scrap zinc, such as sheets, jarlids, clean unalloyed castings and anticorrosion plates. Borings and turnings are not acceptable. Material must not be excessively corroded or oxidized. All foreign attachments and extraneous materials are deductible.
Shall consist of clean dry scrap zinc, such as sheets, jarlids, clean unalloyed castings and anticorrosion plates. Borings and turnings are not acceptable. Material must not be excessively corroded or oxidized. All foreign attachments and extraneous materials are deductible.
Shall consist of clean lead solids, free of other materials, such as drosses,battery plates, lead covered cable, collapsible tubes, type metals, aluminum, zinc, iron and brass fittings, dirty chemical lead and radioactive materials. Review packaging specifications and regulatory status pertaining to shipping with buyer prior to sale.
BDB Exports also supply a range of Primary Metals that meet international standards including LME Grade A and ISRI Specification.
Primary Aluminium Ingots (LME Registered Brand) with 99.70% purity available from LME warehouses.
Primary Aluminium Sows (LME Registered Brand) with 99.70% purity available from LME warehouses.
We have firmly positioned ourselves as one of the most promising Aluminium Wire Rod suppliers. The Aluminium Wire Rods are sourced from highly trusted vendors. Aluminium Wire Rod 9.5mm dia EC Grade 1350 (H14).
Primary Zinc Ingots (LME Registered Brand) with 99.995% purity available from LME warehouses.
Primary Nickel Ingots (LME Registered Brand) with 99.80% purity available from LME warehouses.
Primary Nickel Ingots (LME Registered Brand) with 99.80% purity available from LME warehouses.
Primary Lead Ingots (LME Registered Brand) with 99.97% purity available from LME warehouses.
Primary Tin Ingots (LME Registered Brand) with 99.85% purity available from LME warehouses.
Primary Copper Cathode (LME Registered Brand) with 99.95% purity available from LME warehouses.
We are engaged in supplying good quality of copper wire rods which are known for its quality & effective functioning among our valued clients in 8mm dia.